Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com Thu, 29 Jun 2023 03:51:49 +0000 en-US hourly 1 //wordpress.org/?v=6.1.4 //gd-1.com/wp-content/uploads/2021/02/favicon-32x32.png Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com 32 32 Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/optima-xe-ultracentrifuge/ Thu, 29 Jun 2023 03:51:49 +0000 //gd-1.com/?post_type=product&p=8668 TM XE simplifies use while offering secure loading for efficient, worry-free separations. Designed as a total system, Optima instruments, rotors and labware are designed, manufactured and tested as an integrated system for optimal performance and safety. The Optima XE features:
  • Intelligent user interface
  • Multi-layered biosafety features
  • Efficient energy use
]]> Energy Efficient Technology 

  • Maintains runs during power fluctuations
  • Run Recovery feature allows to continue a run once the power is restored
  • Regenerative braking and low idle power equates to lower power consumption from the centrifuge

Easy to Use Interface 

  • 38.1cm (15â€? LCD touchscreen display
  • Allows for large icons for easy selection
  • Status can be seen from across lab
  • Touchscreen works with many glove types
  • 9 different languages available for the intuitive interface (most in industry)

Enhanced Safety

  • Rotor overspeed disc
  • Dynamic Rotor Inertia Check (DRIC)
  • BioSafe optional dual PALL® Pharmaceutical-Grade Sterilizing Filters

Quiet Drive Technology

  • Designed for the lowest drive noise, which equates to less than 51 dBA during operation.
]]> Centrifuge РC̫ng ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/optima-auc/ Wed, 14 Jun 2023 08:49:17 +0000 //gd-1.com/?post_type=product&p=8545

Improved Data Quality

  • Higher radial resolution
  • Better signal to noise ratio than ProteomeLab
  • 11x more vertical pixels for interference optics
  • Enables precise analysis of complex systems at discrete wavelengths (up to 20) in minimal time

Analyzes a wide array of particles in native, matrix-free conditions, including:

  • Proteins
  • Nanoparticles
  • Peptides
  • Polymers
  • Micelles
  • Liposomes
  • Extracellular vesicles
  • Drug conjugates
  • Viral payload

Provides data which can answer more critical questions than any other comparable technique, including:

  • Shape
  • Mass
  • Diameter
  • Stoichiometry
  • Heterogeneity
  • Association
  • Aggregation
  • Purity
  • Formulation

Easier to Use

  • User-friendly touchscreen display indicates intuitive progression of experimental design.
  • Remote monitoring capabilities let you set up, monitor and extract data from virtually any location.
  • Compatibility with ProteomeLab XL cells and rotors
  • Toggle optics expedite workflow preparation
]]> Centrifuge РC̫ng ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/avanti-j-15-benchtop-centrifuge/ Wed, 31 May 2023 09:54:15 +0000 //gd-1.com/?post_type=product&p=8453
  • Reach up to 10,200 rpm and a max g force of 11,420 RCF
  • A compact 55.6 cm (21.9 inches) width saves valuable lab space
  • Ultra Harmonic Technology effectively minimizes sample disturbance with intelligent acceleration/deceleration profiles resulting in more sample yield
  • New software interface provides one-touch access to your last 6 programs (but stores up to 99)
  • Easy-to-use, color LCD screen lets you enter program parameters with no scrolling
    • ]]>
    Incorporated Ultra Harmonic Technology
    • Ultra-smooth acceleration/deceleration profiles
    • Protects samples from disturbance
    • Results in larger soft pellets and higher sample yield

    Repeatable results for a variety of applications

    • Cell culturing
    • “Spinfectionâ€?to improve transduction
    • Nucleic acid purification
    • Protein concentration
    • Blood component separation
    • Assay setup

    Multi-dimensional imbalance tolerance (MIT)

    • MIT can help identify imbalances more quickly and accurately, thereby reducing the chance of a “false positiveâ€?imbalance alert, so researchers can “set it and forget itâ€?with confidence

    Efficiency

    • Easy one-touch access to 6 programs; stores up to 99 programs
    • High-contrast “app-likeâ€?software design
    ]]>         Centrifuge РC̫ng ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/avanti-j-15r-may-ly-tam-lanh-de-ban-2/ Wed, 31 May 2023 09:43:30 +0000 //gd-1.com/?post_type=product&p=8450
  • Reach up to 10,200 rpm and a max g force of 11,420 RCF
  • Ultra Harmonic Technology effectively minimizes sample disturbance with intelligent acceleration/deceleration profiles resulting in more sample yield
  • New software interface provides one-touch access to your last 6 programs (but stores up to 99)
    •  
    ]]>

    Incorporated Ultra Harmonic Technology

    • Ultra-smooth acceleration/deceleration profiles
    • Protects samples from disturbance
    • Results in larger soft pellets and higher sample yield

    Repeatable results for a variety of applications

    • Cell culturing
    • “Spinfectionâ€?to improve transduction
    • Nucleic acid purification
    • Protein concentration
    • Blood component separation
    • Assay setup

    Multi-dimensional imbalance tolerance (MIT)

    • MIT can help identify imbalances more quickly and accurately, thereby reducing the chance of a “false positiveâ€?imbalance alert, so researchers can “set it and forget itâ€?with confidence

    Efficiency

    • Easy one-touch access to 6 programs; stores up to 99 programs
    • High-contrast “app-likeâ€?software design
    ]]>         Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/allegra-v-15r-benchtop-centrifuge/ Wed, 31 May 2023 09:33:22 +0000 //gd-1.com/?post_type=product&p=8447  g, speeds up to 13,500 rpm and offers 10 rotor configurations. It’s ideal for evolving labs looking to spin samples faster and longer without overheating your samples, and free up precious benchtop space (not only is it compact, the mobile cart lets you move it around the lab wherever you want).
    • Maintain a consistent temperature
    • Operates at â‰?56 dBA at max speed
    • Fast centrifugal braking
    • Supports multiple workflows and applications
    • Compact footprint frees up precious bench space
    ]]>     Streamlined Design & Ergonomic Operation
    • Soft-close lid
    • â‰?56 dBA at full speed
    • Intuitive, uncomplicated panel
    • Bright, at-a-glance display

    Compact Footprint

    • Up to 28% smaller than comparable models
    • 60.5 centimeters wide and 63.5 centimeters deep
    • Mobile cart

    Enhanced Safety

    • Automatic rotor recognition
    • Rotor life tracking
    • Built-in imbalance sensors
    • BioSafe rotor

    Greater Versatility

    • 50 programmable runs
    • 10 rotor configurations
    • Comprehensive selection of adapters for swinging-bucket and fixed-angle rotors
    • Speeds up to 13,500
    • Spins up to 4 x 750 mL
    • Force up to 20,412 x g
    ]]>         Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/allegra-x-30-benchtop-centrifuge/ Wed, 31 May 2023 09:18:55 +0000 //gd-1.com/?post_type=product&p=8443 ® X-30 Series Benchtop Centrifuges provide excellent performance and easy operation in a compact design that saves valuable time and laboratory space.
    • Highest speed and g-force in its class
    • Simple and quick run setup
    • Flexible with extensive rotor library for multiple applications
    • Compact Design â€?Only 18" wide (46cm)
    • BioCertified* swinging-bucket and fixed-angle rotors
    ]]>

    Compact and Powerful

    • Only 18″ wide (46cm)
    • Save valuable lab space and priceless running time
    • Highest RPMs and g force in its class

    Accommodating Your Application Needs

    • Cell culture processing
    • Blood sample preparation
    • Microplate applications

    Available Rotor Versatility

    • 13 different rotors
    • Multiple pre-bundled application packages
    • Three different ways to spin 1.5mL and PCR tubes
    • Spin 500 µL to 1.6L with the SX4400 Swinging Bucket Rotor

    Easy to Use

    • Streamlined user interface
    • Digital display makes it quick to set and easy to run
    ]]>         Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/microfuge-20-benchtop-centrifuge/ Wed, 31 May 2023 09:09:52 +0000 //gd-1.com/?post_type=product&p=8440 ® 20 Series are precisely designed to meet a wide variety of application needs including,
    • Nucleic acid and protein preparation
    • Pelleting, extractions
    • Purifications
    • Concentrations
    • Phase separations and receptor binding
    • Rapid sedimentation of protein precipitates, particulates and cell debris.
    Paired with Beckman Coulter Microfuge Series rotors, this mini-centrifuge series offers you all the flexibility you need for your separation protocols.
    • 15,000 RPM
    • 20,627 x g
    ]]>     Designed for a variety of applications, including nucleic acid and protein preparation, phase separations and receptor binding, and rapid sedimentation of protein precipitates, particulates and cell debris

    Meet your Application Needs

    • Available in refrigerated and non-refrigerated designs
    • Four different rotor options from for ultimate flexibility
    • Optional BioCertified rotor for safe processing of hazardous samples

    Increased Speed and Capacity

    • Fast sample processing at maximum speeds of up to 15,000 rpm (20,627 x g)
    • Spin more samples per run with a maximum capacity of 36 x 1.5/2.0 mL tubes

    An Intuitive Addition to your Lab

    • Efficient and easy-to-use interface displays both speed (rpm) and RCF (xg)
    • Reduced setup time with user-defined programs for common lab protocols
    • Lower total cost-of-ownership with increased energy efficiency

    Increased Safety Measurements

    • Safely process samples with optional BioCertified* FA361.5 fixed angle rotor
    ]]>         Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/allegra-64r-benchtop-centrifuge/ Wed, 31 May 2023 09:02:21 +0000 //gd-1.com/?post_type=product&p=8437 ® 64R benchtop centrifuge performs high-speed separations at a fraction of the footprint.
    • 64,400 x g
    • 30,000 rpm
    • Fast acceleration and deceleration times for quicker spins
    • Ideal for subcellular fractionation, protein isolation and purification, viruses and phase extractions.
    ]]>     Ideal for subcellular fractionation, protein isolation and purification, viruses and phase extractions, it delivers outstanding high-speed performance in a compact design

    Optimal for Subcellular Fractionation, Proteins and Viruses

    • 64,000 x g (30,000 rpm) with fixed-angle rotor
    • Spin tubes from 0.25 up to 85 mL
    • Operating temperature from 2º C to 40º C
    • Rotors certified by Porton Down UK for Biocontainment

    The solution for high-speed Seperations

    • Cell gradient spins
    • Nucleic acid precipitations
    • DNA mini-preps
    • Phase extractions

    Easy-to-use control panel

    • Displays actual speed, RFC, time & temperature
    • Acceleration/deceleration rates that can be customized to profiles for routine runs

    Additional features

    • Safety door interlock prevents contact with spinning rotor
    • Flexible drive shaft to compensate for drive imbalances
    • Compatible with thirteen rotors
    ]]>         Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/microfuge-20r-bench-top-contrifuge/ Wed, 31 May 2023 08:57:28 +0000 //gd-1.com/?post_type=product&p=8434 ® 20R Series are precisely designed to meet a wide variety of application needs including,
    • Refrigerated
    • Nucleic acid and protein preparation
    • Pelleting, extractions
    • Purifications
    • Concentrations
    • Phase separations and receptor binding
    • Rapid sedimentation of protein precipitates, particulates and cell debris.
    Paired with Beckman Coulter Microfuge Series rotors, this mini-centrifuge series offers you all the flexibility you need for your separation protocols.
    • 15,000 RPM
    • 20,627 x g
    ]]>     Designed for a variety of applications, including nucleic acid and protein preparation, phase separations and receptor binding, and rapid sedimentation of protein precipitates, particulates and cell debris

    Meet your Application Needs

    • Available in refrigerated and non-refrigerated designs
    • Four different rotor options from for ultimate flexibility
    • Optional BioCertified rotor for safe processing of hazardous samples

    Increased Speed and Capacity

    • Fast sample processing at maximum speeds of up to 15,000 rpm (20,627 x g)
    • Spin more samples per run with a maximum capacity of 36 x 1.5/2.0 mL tubes

    An Intuitive Addition to your Lab

    • Efficient and easy-to-use interface displays both speed (rpm) and RCF (xg)
    • Reduced setup time with user-defined programs for common lab protocols
    • Lower total cost-of-ownership with increased energy efficiency

    Increased Safety Measurements

    • Safely process samples with optional BioCertified* FA361.5 fixed angle rotor
    ]]>         Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/microfuge-16-benchtop-centrifuge/ Wed, 31 May 2023 08:48:13 +0000 //gd-1.com/?post_type=product&p=8430 ® 16. This microprocessor-controlled mini benchtop centrifuge generates centrifugal forces required for a wide variety of applications.
    • 14,800 RPM
    • 16,163 x g
    ]]>     A microprocessor-controlled mini-benchtop centrifuge that generates centrifugal forces required for a wide variety of applications

    Fast Micro-Centrifugation

    • Maintenance-free rotors spin up to 14,800 rpm (16,163 x g)
    • Large bright display with simple push button key entry and automatic lid release at run completion

    Maximize Productivity

    • Reduces process time with fast acceleration and deceleration rates
    • Choice of pulse, timed or continuous runs for added flexibility

    Ensure Safety

    • The Microfuge 16 features a brushless induction drive, safety auto-lock closure system
    • Unique, air-cooled rotor bowl for years of safe, high-performing operation

    Ultra-Compact Design

    • The instrument features a compact footprint, measuring at 8.9 by 10.5 inches
    • Accommodates a wide array of microcentrifuge tubes from 0.2 to 2.2 mL with a choice of standard or soft start/stop programs
    ]]>         Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/avanti-j-26s-high-speed-centrifuge/ Wed, 31 May 2023 08:42:38 +0000 //gd-1.com/?post_type=product&p=8427 ® J-26S centrifuge series combines high performance, complete BioSafety systems, and long-term durability, making it an incredibly capable choice for any lab environment. Experience simplified high-throughput sample processing and more control with powerful features including:
    • Automatic rotor identification
    • Low heat output
    • Imbalance tolerance
    • Quiet performance
    • Ergonomic design features
    ]]>

    For simplified high-throughput sample processing and more control; key features include imbalance tolerance, quiet performance and low heat output

    Application Versatility

    • Process six liters of fermentor output in less than 10 minutes
    • Deliver a subcellular fraction at 82,000 x g
    • Run 24 microplates at a time
    • Separate live cell populations with elutriation

    Enhanced Safety

    • Multi-level biocontainment systems that prevent leakage of biohazardous samples
    • Impact-resistant lid
    • Full containment barrier

    Sample Protection

    • Automatically detect which rotor is installed
    • Prevent rotors from running above maximum-rated speeds while maintaining the run

    Optimize Cell Separation

    • Utilize the Avanti J-26S for elutriation
    • Separate and/or concentrate monodisperse suspensions of single cells or particles via elutriation rotor
    ]]>         Centrifuge – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/avanti-j-hc-high-speed-centrifuge/ Wed, 31 May 2023 08:38:00 +0000 //gd-1.com/?post_type=product&p=8424 ® J-HC High Capacity Centrifuge provides you with a complete solution for batch bioprocessing. A maximum of 9 Liters can be spun at speeds of 5,000 rpm and 7,480 x g for greater sample throughput. This allows processing of up to 36 Liters per hour when harvesting bacteria.
    • Convenient data management and cGMP support features delivers confidence
    • Enhanced operator safety is provided with disposable HarvestLine System Liners
    • Fastest acceleration and deceleration times with exclusive SR Drive technology
    • Low heat output and low energy consumption
    ]]>

    Sample Integrity

    • Labware which includes Harvest Liners to minimize contamination
    • Convenient sample recovery and long term sample storage

    Batch Processing

    • Ideal for processing large volumes such as harvesting bacteria
    • Highest capacity in its class

    BioSafety

    • Convenient data management system
    • cGMP support features delivers confidence

    Time Savings

    • Achieve efficiencies when processing large volumes for greater sample throughput
    • Fastest acceleration and deceleration times with exclusive SR Drive technology
    ]]>