Particle size analyzer – Công ty TNHH TM DV KT Minh Khang

Particle size analyzer – Công ty TNHH TM DV KT Minh Khang //gd-1.com Fri, 04 Oct 2024 03:48:38 +0000 en-US hourly 1 //wordpress.org/?v=6.6.2 //gd-1.com/wp-content/uploads/2021/02/favicon-32x32.png Particle size analyzer – Công ty TNHH TM DV KT Minh Khang //gd-1.com 32 32 Particle size analyzer – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/multisizer-4e-coulter-counter/ Thu, 14 Mar 2024 07:59:37 +0000 //gd-1.com/?post_type=product&p=11724

Mammalian cells

Bacteria

Yeast

Abrasives

Toner particles

Cell aggregates

Spheroids

Large protein aggregates

]]>

Versatility

Aperture sizes from 10 µm – 2000 µm in diameter for current & future needs
Multiple aperture options & data overlay capability for analyzing complex samples over wide particle size distribution

Sample Detection

Analyze materials in aqueous or non-aqueous solvents
Ideal for biological or non-biological samples
Detect particles regardless of material type or optical properties

Rapid Particle Counting

Typical sampling rates up to 10,000 counts per second
Detect & count particles from 0.2 µm – 1600 µm in diameter
Sample volumes as small as 5 mL

Data Management

Digital pulse data can be stored & re-analyzed as needed
CFR 21 Part 11 compliant software for audit control & security
Variety of calibration beads & V-check validation controls

]]> Particle size analyzer – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/ls-13-320-xr-particle-size-analyzer/ Thu, 14 Mar 2024 07:55:35 +0000 //gd-1.com/?post_type=product&p=11723 PIDS technology,* which enables high-resolution measurements and an expanded dynamic range. Like the LS 13 320, the XR particle size analyzer provides fast, accurate results, and helps you streamline workflows to optimize efficiency. Some big improvements help you reliably spot small differences that can have a huge impact on your particle analysis data.

Direct measurement range from 10 nm �?3,500 µm
Automatically highlights pass/fail results for faster quality control
Enhanced software that simplifies method creation for standardized measurements
New control standards to adequately verify instrument/module performance

]]>

Spot Small Differences

Expanded measurement range: 10 nm �?3,500 µm
Laser diffraction plus advanced Polarization Intensity Differential Scattering (PIDS) technology enable high-resolution measurement & reporting of real data down to 10 nm
Provides accurate, reliable detection of multiple particle sizes in a single sample

Easy-To-Use Software

ADAPT Software features automatic pass/fail check
Pre-configured methods deliver results with 3 clicks or less
Simplifies analyzer operation by experts & novice users alike
1-click overlay with historical data
Intuitive user diagnostics keep you informed during sampling
Simplified method creation for standardized measurements

ADAPT Software enables 21 CFR Part 11

Customizable security system to meet diverse needs
Choose from 4 security levels
High-security configuration supports 21 CFR Part 11

PIDS Technology* for Direct Detection of 10 nm Particles

3 light wavelengths (450, 600, & 900 nm) irradiate samples with vertical & horizontal polarized light
Analyzer measures scattered light from samples over a range of angles
Differences between horizontally & vertically radiated light for each wavelength yield high-resolution particle size distribution data

]]> Particle size analyzer – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/hiac-9703-pharmaceutical-particle-counter/ Wed, 10 May 2023 08:19:15 +0000 //gd-1.com/?post_type=product&p=8000 USP 787, 788 and EP 2.9.19. Flexible calibration at multiple flow rates improves ease of sampling for varying sample viscosities and volumes. Ease of use and data integrity are prioritized in PharmSpec with features such as login credentials controlled by Microsoft Active Directory, multi-level user rights, automated pass/fail compendial reporting, comprehensive audit trail, and auto-flush routines for improved walkaway operation. In addition to the built-in compendial test routines, user-defined SOPs can be programmed into the counter using PharmSpec Software’s Procedure Builder.

PharmSpec software is 21 CFR Part 11 ALCOA compliant
Secure database is either sited on the local pc operating the HIAC 9703 sampler, or sited remotely on a networked server
Periodic database backup can be selected for additional database security
Specially designed vial clamp holds sample in place and small-bore sampling probe enables full application of USP<787> for protein based drug products, such as vaccines

]]> Applications

Small volume injectable (SVI)
Large volume injectable (LVI)
Research & development
Troubleshooting
Stability testing

Sample management

Instant particle contamination notification
Small vial holder & tare volume conserves costly samples
Configurable flow rates & interchangeable sensors for 0.5 µm – 600 µm particle size detection
Interchangeable sample probes & syringes

Software

Program custom SOPs to eliminate manual counter configuration and pass/fail calculations
Multi-level security for 21 CFR Part 11 compliance
Automatic database backup & recovery loss feature protects valuable results and data

Support

Expert SOP & IQ/OQ validation services available
Routine onsite service available for maximum uptime
ISO 21501 compliant calibrations

]]> Particle size analyzer – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/haver-cpa-2-1-online-dynamic-image-analysis-dia-in-the-production-process/ Wed, 02 Nov 2022 03:25:48 +0000 //gd-1.com/?post_type=product&p=6839 Particle size and shape analysis with NEXOPART CPA online measuring devices

The integration possibilities of the NEXOPART CPA Online in production processes as a testing, monitoring or regulating element are very versatile. Incoming inspection, production control and process monitoring are the common application scenarios in which a HAVER CPA online unit is used for particle size and particle shape analysis. Our CPA online measuring devices are ideally suited for the analysis of:

blasting abrasives
fertiliser
sand
foods such as salt and sugar

]]>

Installation of the HAVER CPA Online in a running production process

Online particle analysers are flexible and can be integrated almost anywhere, even retroactive

For existing processes, there is immediate added value due to the disproportionately larger database

Various IP protection classes are available for the modules

Integrated, precisely customisable evaluation tools when using the CpaServ software

No process control system or DCS integration required

]]> Particle size analyzer – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/haver-cpa-2-1-particle-sizes-analysis/ Tue, 01 Nov 2022 08:56:34 +0000 //gd-1.com/?post_type=product&p=6825

Efficient grain size and shape analysis in the measuring range from 20 µm to 30 mm

Do you determine the grain shape and grain sizes of dry bulk materials in your laboratory using classical sieving? In this case, weighing, sieve tower assembly and the time-consuming cleaning of the sieves are an avoidable expense: The NEXOPART CPA 2-1 particle measuring device offers you an efficient alternative and guarantees exact and reproducible measuring results.

]]>

Optimum reproducibility with minimum measuring times at the same time
Measurement range of 20 µm to 30 mm
Simple and intuitive operation of the CpaServ software
Comprehensive and versatile, directly available analyses
Durable and energy-saving light source
Meets the requirements of ISO 13322-2 for dynamic image analysis
High reliability and precision due to an automatic measuring sequence
“1-click measurements” via exemplary customisable software interface
A significant increase in measurements/day due to increased efficiency
Immediate availability of the digital result data

]]>