Fusion Machine – Công ty TNHH TM DV KT Minh Khang //gd-1.com Thu, 14 Mar 2024 08:48:55 +0000 en-US hourly 1 //wordpress.org/?v=6.6.2 //gd-1.com/wp-content/uploads/2021/02/favicon-32x32.png Fusion Machine – Công ty TNHH TM DV KT Minh Khang //gd-1.com 32 32 Fusion Machine – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/autotouch-press-fusion-machine-of-automated-xrf-sample-preparation/ Thu, 14 Mar 2024 08:45:18 +0000 //gd-1.com/?post_type=product&p=11732
  • Automatic laboratory presses up to 40 tons
  • Atlas�?series automatic induction hydraulic presses, available in 8 Ton, 15 Ton, 25 Ton and 40 Ton load configurations.
  • It is especially popular with analytical sample preparation for Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Fluorescence (XRF).
    • ]]>
  • Automatic hydraulic press, easy to use
  • The automatic press is fully programmable, microprocessor controlled, electrically assisted hydraulics for ease of use and repeatability.
  • Ergonomic design and low noise characteristics. Its ease of use makes this hydraulic press suitable for both laboratory and industrial environments.
  • Touch screen for press operation supported, Use the touch screen controls to program your loads, then anyone can apply loads consistently.
  • The Autotouch automatic laboratory press is easy to use with its multilingual LED touch screen.
  • Once the load is established, minimal training is required and no pressure is applied without lowering the safety guard, for safety considerations. This helps improve your FTIR or XRF sample preparation throughput.
  • Compatible with measurement standards
  • Standard Test Method for Chemical Analysis of Hydraulic Cement ASTM C114
  • The compound uses ASTM D2124 infrared spectroscopy technique
    • ]]>         Fusion Machine – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/nieka-e3-a-electric-fusion-instrument-model/ Wed, 06 Apr 2022 08:48:02 +0000 //dev.gd-1.com/?post_type=product&p=5445 Model: E3-a]]>
  • Fully automated glass bead or solution preparation – unique safe to touch glass surface
  • No fragile ceramic parts
  • Up to 1250oC fusion temperature
  • Ultra-precise temperature control for complex pre-oxidation – exhaust fumes concentrated in a small extraction area
  • Plug and use in seconds
  • 208-240 V / 20 A / 2500W max.
    • ]]>         Fusion Machine – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/nieka-e1-a-electric-fusion-instrument-model/ //gd-1.com/en/san-pham/nieka-e1-a-electric-fusion-instrument-model/#respond Wed, 06 Apr 2022 08:35:33 +0000 //dev.gd-1.com/?post_type=product&p=5444 Model: E1-a]]>
    • Fully automated glass bead or solution preparation – unique safe to touch glass surface
    • No fragile ceramic parts
    • Up to 1250oC fusion temperature
    • Ultra-precise temperature control for complex pre-oxidation – exhaust fumes concentrated in a small extraction area
    • Plug and use in seconds
    • 208-240 V / 20 A / 2500W max.
    ]]>     //gd-1.com/en/san-pham/nieka-e1-a-electric-fusion-instrument-model/feed/ 0     Fusion Machine – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/nieka-core-6-fusion-instrument/ Wed, 06 Apr 2022 07:50:15 +0000 //dev.gd-1.com/?post_type=product&p=5435
    At NIEKA®, we design and build the most advanced fusion instruments. Each of our product is crafted by the peoples that travel the world to visit laboratories like yours. The Core-6 is the achievement of a decade-long research program where nothing has been left behind. With the Core systems, you will benefit from multiple inventions and the experience of Nieka users worldwide. The Core-6 mechanical systems are based on the proven Nieka platform: they are sturdy, efficient and easy to maintain.
    Model: Core6  ]]>
    • Modular furnace for instant on-site maintenance*

    The main furnace can be removed and replaced within minutes with no special tools. You can resume operation without a lengthy cooldown and on-site repair. The entire heating assembly comes as a snap: elements, insulation and sensors, nothing is left behind.

    • Fully modular power system and zone control

    Each furnace zone is powered by its own power module. The temperature inside the furnace is uniform.

    • Circular agitation motion allowing faster sample dissolution*

    Borate fusion is a dissolution technique. If you stir better, you dissolve faster, it’s that simple. Our fully circular and rapid motion will reduce repeat and save up to 30% of dissolution time.

    • Pre-oxidation chamber for true temperature ramping (optional)*

    Several sample types require a pre-oxidation step, which is challenging with a furnace-type fluxer. Our inovative middle chamber allows an intermediate temperature step.

    • Filtered cooling air

    The stream of air cooling the glass disks and internal electronics is fully filtered. Even in dusty environments, the Nieka Core system will deliver premium analytical purity.

    • Cold crucible retaining bar*

    When the hot crucibles are moved out of the furnace for the pouring step, a special bar is waiting outside to hold them in place for the final tilt. Having such bar outside of the furnace reduces the contamination and failures associated with retaining bars inside the furnace

    ]]>         Fusion Machine – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/nieka-gs4-a-fusion-instrument/ Wed, 06 Apr 2022 07:24:39 +0000 //dev.gd-1.com/?post_type=product&p=5418 Model: GS4-a  ]]>

    Nieka® G-Series – new and unique features

    • High Productivity – 4 positions (up to 24 samples per hour)
    • Automated Operation – Multilingual integrated touchscreen controller with accessible controls, easy to follow fusion program execution through the instrument screen, or your PC.
    • Monitoring – Temperature monitoring of the fusion process (patent pending), real-time monitoring through the Nieka data management system.
    • Efficiency and Repeatability – proprietary heating chambers allow a high thermal efficiency and higher fusion temperatures for difficult samples.
    • Easy Installation – low pressure gas line and standard electrical outlet. no compressed air or oxygen is required.
    • Safety – integrated locking safety door, real time fusion monitoring and automatic shut off feature.

    ]]>         Fusion Machine – Công ty TNHH TM DV KT Minh Khang //gd-1.com/en/san-pham/nieka-g8-gas-fusion-instrument/ Wed, 06 Apr 2022 07:13:48 +0000 //dev.gd-1.com/?post_type=product&p=5417
    The Nieka G-Series Fusion Instruments have been forged to fit the most demanding high-throughput fusion laboratories, providing unparalleled performance. The elegant design, large touch screen interface and unique software make any function simple and easy to use. Model: G8
    ]]>     You can process more samples, enjoy a reliable and safe operation, and keep the maintenance cost very low.

    The Peroxide model comes packed with the key G-Series features such as:

    + automated sample preparation
    + touchscreen control
    + efficient sample agitation
    + fully configurable fusion parameters + operation on a low pressure gas line + locking door and flame monitoring + USB ports, TCP/IP Ethernet port

    ]]>