- Using surfactants during spraying
- Detergent formulation and optimization for washing and cleaning processes
- Wetting agent for coating and printing
- Research and development of surfactants
BP100 – Bubble Pressure Tensiometer
The BP100 Bubble Pressure Tensiometer analyzes the mobility of based on the (SFT). This allows you to find out how quickly surface-active substances such as detergents or wetting agents achieve the required reduction of the SFT. With the help of this information, you can optimize formulations for dynamic processes such as spraying, coating, printing, or cleaning.
INSTRUMENT DIMENSIONS
Footprint | 300 mm × 390 mm (W × D) |
---|---|
Height | 585 mm |
Weight (without accessories) | 13 kg |
TEMPERATURE MEASUREMENT
Range of temperature measurement | -10 to 130 °C |
---|---|
Resolution | 0.01 °C |
Precision | 0.05 °C |
Accuracy | 0.5 °C |
Internal sensor | sample stage |
External sensor | optional: sample vessel |
POWER SUPPLY
Voltage | 100 to 240 V |
---|---|
Power consumption | 40 W |
Frequency | 47 to 63 Hz |
Compressed air | optional: 100 to 400 kPa |
SAMPLE DIMENSIONS
Min. recommended sample volume | 15 mL (sample vessel SV23) |
---|
ENVIRONMENT
Operating temperature | 15 to 30 °C |
---|---|
Humidity | without condensation |
TEMPERATURE CONTROL
Type of temperature control | liquid |
---|---|
Range of temperature control | -10 to 130 °C |
Flow-through thermostat | optional |
INTERFACES
PC | USB 2.0 |
---|---|
Auxiliary | RS232 |
Thermostat | quick lock fittings |
External gas | optional (quick lock fittings) |
HOUSING AND PERIPHERALS
Built-in bubble level | yes |
---|---|
Glass windshield doors | yes |
Stainless steel measuring compartment | yes |
Control pad | yes |
PRESSURE MEASUREMENT
Maximum pressure | 3000 Pa |
---|---|
Precision | 0.05% |
Accuracy | 1.3% |
Measurement rate | 20 kHz |
SAMPLE STAGE
Travel distance | > 110 mm |
---|---|
Simple platform | optional |
Temperature control jacket | optional: 70 mm or 100 mm |
DRIVE
Resolution | 16 nm |
---|---|
Travel speed | 0.1 to 500 mm/min |
Type of motor | brushless DC servo motor |
SOFTWARE
Software type | LabDesk |
---|---|
Available software modules | bubble pressure |
BUBBLE PRESSURE
Results | dynamic surface tension vs. surface age dynamic surface tension at constant surface age adsorption constant / Ward & Tordai diffusion constant / Joos & Rillaerts |
---|---|
Range (surface tension) | 10 to 100 mN/m |
Resolution (surface tension) | 0.01 mN/m |
Precision (surface tension) | 1% |
Range (surface age) | 5 to 200000 ms |