Bắn cá - Công ty TNHH trò chơi

Online Support

Ms. An
0902 638 688

APEX 500 Rx – Pharmaceutical Metal Detector

Achieve cost-effective, industry-leading sensitivity in the most demanding pharmaceutical environments while meeting the U.S. Federal Drug Administration’s (FDA) stringent requirements for validated production with the Thermo Scientific™ APEX 500 Rx Pharmaceutical Metal Detector.

Category: Brand:

The APEX 500 Rx Pharmaceutical Metal Detector is a mobile, versatile and reliable solution for tablet presses, capsule filling and deduster applications. Equipped with a multi-coil design that isn’t impacted by product effects or environmental changes, the APEX 500 Rx Pharmaceutical Metal Detector also features:
  • High sensitivity to detect pieces of metal as small as 0.3mm
  • Increased product throughput up to 500K tablets or caplets per hour
  • Straight-through product flow to eliminate product damage
  • Performance verification: Validate your APEX 500 Rx Pharmaceutical Metal Detector using Thermo Scientific™ Quality Assurance Test (QAT) and AuditCheck features
  • Compliant: Remain in compliance with GMPs in 21 CFR part 210 and 211
  • Adjustability: Height and angle adjustment handles
  • Easily accessible rejecter assembly/disassembly for quick cleaning
  • Multiple aperture sizes: Custom fit for your production line
  • User-friendly interface: Solid-state, touch operation control panel with icon-driven interface
Input Types 6 Inputs – Active 12VDC+ 12 V auxiliary supply for input sensors
Languages English, Spanish, French, German, Italian, Dutch, Chinese, Czech, Russian, Polish, Thai, Korean, Brazilian Portuguese
Sensitivity Detects metal contaminants as small as 0.3 mm
Electrical Requirements 85/260 V AC single phase plus earth ground; 47/65 Hz, 100 watts max.
For Use With (Application) Metal detection: Pharmaceuticals
Description APEX 500 Rx Metal Detector
Construction Stainless steel 304 straightlined case, high polish optional. All plastics used are FDA approved.
Certifications/Compliance cCSAus, CE; ISO9001 certified
Speed 0.5 m/min. (1.7 ft./min.) to 100 m/min. (330 ft./min.) for the system
Operating Temperature -10°C to +40°C (14°F to 104°F)
Input Allocation Speed Sensor, Keylock, Product Select 1, Product Select 2, Infeed PEC, Reject Confirmation 1 and Bin Full External Suppression, Reject 1 Complete, Clear All Warnings/Alarms/Faults (selectable via menu), External Alarm and External Reset
Input Applications Speed Sensor, Keylock, Product Select 1, Product Select 2, Infeed PEC, Reject Confirmation 1 and Bin Full External Suppression, Reject 1 Complete, Clear All Warnings/Alarms/Faults (selectable via menu), External Alarm and External Reset
Output Types 6 Relays outputs; Relays: 250 volt AC 2 amp max. 50 volt DC 1 amp max.
Output Allocation Reject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QAT lamp (selectable via menu)
Output Applications Reject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QAT lamp (selectable via menu)
Air Supply 5.5 bar (80 psi) nominal, 4 bar (60 psi) minimum – for AuditCheck and/or pneumatic rejector (not required for electronic rejector)
Communications Optional ModBus serial or Ethernet modules
IP Rating Type 3 enclosure, metal detector and control panel only
Relative Humidity 20 to 80% non-condensing
Unit Size Each

Related products

Elemental analyzer

DS5 – Dual Beam UV-Vis Spectrophotometer